Configure an Ethernet Port

You must be in the process of configuring a new device profile or editing an existing profile to use this procedure.

Use this procedure to configure or edit Ethernet Port settings for a device profile.

Go to Profiles and select a target device profile.
The Profiles dashboard opens.
Select the Interface tab.
The Interface dashboard opens, displaying the Virtual tab.
Select the Ethernet tab.
The Ethernet window opens, displaying a list of the Ethernet Ports available for the selected device profile.
Select an Ethernet port in the list.
Configure or edit settings as described in the procedures associated with the Basic, Port Switching, Aggregation, Discovery, Fabric Attach, Security, and Spanning Tree tabs.
After you have completed configuring the settings, choose from the following actions:
1. Select Revert to restore default settings or restore the last saved settings.
  
  Note
  You cannot restore default settings after applying or saving changes.
2. Select Apply to commit the configured settings.
  
  Note
  This does not permanently save the settings you configured. If you perform a Reload (warm reboot), applied settings will be lost.
3. Select Save to commit and save the configured settings.
  
  Note
  
  If you do not select Apply or Save, the settings that you configured are not saved when you move away from the configuration window.